- Equine Initiative
- Regulatory Services
- Biosystems/Ag Engineering
- Food Science
- Fine Arts
- Community Development
- 4-H Youth
- Family and Consumer Sciences
- Ag Information Center
- Ag Magazine
- Office of Diversity
- Ag Weather
- Ag Faculty Council
- Staff Links
- College Store
Conservation, efficiency important as farm fuel prices climb
“Everybody’s looking for ways to cut fuel usage and increase their efficiency,” said Tim Stombaugh, agricultural engineer with the University of Kentucky College of Agriculture. “Don’t do the field work if you don’t need to, and I’m talking primarily about tillage. Think seriously about moving from a conventional tillage system to a conservation or no-tillage system.”
Switching from tilling fields to no-till production practices reduces the number of passes across fields and reduces fuel use. Combining tasks as you go across the field also can help.
Every little bit of savings will help with farm fuel and oil expenses forecast to increase 12.6 percent in 2008 following an 11.5 percent rise in 2007, according to the U.S. Department of Agriculture’s Economic Research Service. Annual average fuel prices have registered six straight double-digit percentage increases. Projections show a 159 percent increase from 2002 through the end of 2008, according to the USDA’s Economic Research Service.
Stombaugh said there are other things farmers can do as well to increase their fuel efficiency. Match the implement to the tractor. Often tractors are much larger than they need to be for the implements they pull through the field. Matching the tractor and implement will make the whole system work more efficiently, he said.
If you must use a tractor that is too large for the implement then remember to “gear up and throttle back.” Running in a higher gear with a lower throttle setting will help the tractor operate more efficiently.
Properly ballast the tractor. Tractors are often not properly ballasted, because there’s not the desired amount of wheel slip. For field work the best wheel slip is 10 percent, which is more than a lot of people are comfortable with, but this is where the tractor operates most efficiently, he said. Also watch for distribution between the front and rear of the tractor and make sure it is balanced properly.
Appropriately inflate tires. Often tires are over-inflated for the job. One study showed that by reducing the tire pressure from 28 PSI to 14 PSI, the lowest rate recommended by the manufacturer, they were able to increase field capacity by 11 percent and increase fuel efficiency by 26 percent.
Finally, Stombaugh said keeping equipment well maintained can aid in fuel efficiency. Keep the filters clean and the machine well lubricated.
Keep the brakes on planting a little longer
Early summer could come at a price, UK ag meteorologist cautions
Photo depicts damage to apple trees after the Easter Freeze in 2007.
Without looking at the calendar, Kentuckians might easily be fooled into thinking...
The Arboretum gears up to host a Party for the Planet
The Arboretum, on the campus of the University of Kentucky in Lexington, is partnering with LG&E and KU Energy LLC to offer a month-long celebration called Party for the Planet 2012, with activities for...